How severe is CVE-2024-40906?

CVE-2024-40906 has a CVSS 3.x base score of 7.8, rated high severity. It is exploitable over local access with low attack complexity, requires low privileges and no user interaction. Impact on confidentiality is high, integrity high, and availability high.

Is CVE-2024-40906 being actively exploited?

It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (20th percentile), an estimate of the probability of exploitation in the next 30 days.

What products are affected by CVE-2024-40906?

CVE-2024-40906 primarily affects Linux Linux Kernel. In total, 3 product configurations (CPEs) are listed as vulnerable; see the affected-products list for the exact versions.

How do I fix CVE-2024-40906?

Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround. Given its high severity, prioritise patching exposed systems.

Does CVE-2024-40906 have an EU (EUVD) identifier?

Yes. CVE-2024-40906 is tracked in the ENISA EU Vulnerability Database (EUVD) as EUVD-2024-38717.

When was CVE-2024-40906 published?

CVE-2024-40906 was published on 2024-07-12 and last updated on 2026-06-17.

CVE-2024-40906

CVE-2024-40906 is a high-severity vulnerability in Linux Linux Kernel with a CVSS 3.x base score of 7.8. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low. The underlying weakness is classified as CWE-416.

Key facts

Severity: High (CVSS 3.x base score 7.8)
EPSS exploit prediction: 0% (20th percentile)
Actively exploited: Not listed in CISA KEV
EU (EUVD) id: EUVD-2024-38717
Weakness: CWE-416
Affected product: Linux Linux Kernel
Published: 2024-07-12
Last modified: 2026-06-17

Description

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]---

Frequently asked questions

What is CVE-2024-40906?: In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]---
How severe is CVE-2024-40906?: CVE-2024-40906 has a CVSS 3.x base score of 7.8, rated high severity. It is exploitable over local access with low attack complexity, requires low privileges and no user interaction. Impact on confidentiality is high, integrity high, and availability high.
Is CVE-2024-40906 being actively exploited?: It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (20th percentile), an estimate of the probability of exploitation in the next 30 days.
What products are affected by CVE-2024-40906?: CVE-2024-40906 primarily affects Linux Linux Kernel. In total, 3 product configurations (CPEs) are listed as vulnerable; see the affected-products list for the exact versions.
How do I fix CVE-2024-40906?: Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround. Given its high severity, prioritise patching exposed systems.
Does CVE-2024-40906 have an EU (EUVD) identifier?: Yes. CVE-2024-40906 is tracked in the ENISA EU Vulnerability Database (EUVD) as EUVD-2024-38717.
When was CVE-2024-40906 published?: CVE-2024-40906 was published on 2024-07-12 and last updated on 2026-06-17.

References

Affected products (3)

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.10:rc1:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:6.10:rc2:*:*:*:*:*:*

More vulnerabilities in Linux Linux Kernel

CVE-2023-2163 — Critical (CVSS 10.0): Incorrect verifier pruning in BPF in Linux Kernel >=5.4 leads to unsafe code paths being incorrectly marked as safe,…
CVE-2015-8104 — Critical (CVSS 10.0): The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a…
CVE-2015-1421 — Critical (CVSS 10.0): Use-after-free vulnerability in the sctp_assoc_update function in net/sctp/associola.c in the Linux kernel before…
CVE-2014-2523 — Critical (CVSS 10.0): net/netfilter/nf_conntrack_proto_dccp.c in the Linux kernel through 3.13.6 uses a DCCP header pointer incorrectly,…
CVE-2010-2495 — Critical (CVSS 10.0): The pppol2tp_xmit function in drivers/net/pppol2tp.c in the L2TP implementation in the Linux kernel before 2.6.34 does…
CVE-2010-2521 — Critical (CVSS 10.0): Multiple buffer overflows in fs/nfsd/nfs4xdr.c in the XDR implementation in the NFS server in the Linux kernel before…

All CVEs affecting Linux Linux Kernel →

Other CWE-416 (Use After Free) vulnerabilities

CVE-2026-13782 — Critical (CVSS 10.0): Use after free in Browser in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the…
CVE-2026-4725 — Critical (CVSS 10.0): Sandbox escape due to use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149…
CVE-2026-4688 — Critical (CVSS 10.0): Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox…
CVE-2025-24085 — Critical (CVSS 10.0): A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.3 and iPadOS 18.3,…
CVE-2024-43102 — Critical (CVSS 10.0): Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of…
CVE-2021-32495 — Critical (CVSS 10.0): Radare2 has a use-after-free vulnerability in pyc parser's get_none_object function. Attacker can read freed memory…

Browse all CWE-416 (Use After Free) vulnerabilities →