CVE-2024-46788
CVE-2024-46788 is a medium-severity vulnerability in Linux Linux Kernel with a CVSS 3.x base score of 5.5. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low. The underlying weakness is classified as CWE-476.
Key facts
- Severity: Medium (CVSS 3.x base score 5.5)
- EPSS exploit prediction: 0% (11th percentile)
- Actively exploited: Not listed in CISA KEV
- EU (EUVD) id: EUVD-2024-42049
- Weakness: CWE-476
- Affected product: Linux Linux Kernel
- Published:
- Last modified:
Description
In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Use a cpumask to know what threads are kthreads The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthread ---truncated---
Frequently asked questions
- What is CVE-2024-46788?
- In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Use a cpumask to know what threads are kthreads The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthread ---truncated---
- How severe is CVE-2024-46788?
- CVE-2024-46788 has a CVSS 3.x base score of 5.5, rated medium severity. It is exploitable over local access with low attack complexity, requires low privileges and no user interaction. Impact on confidentiality is none, integrity none, and availability high.
- Is CVE-2024-46788 being actively exploited?
- It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (11th percentile), an estimate of the probability of exploitation in the next 30 days.
- What products are affected by CVE-2024-46788?
- CVE-2024-46788 primarily affects Linux Linux Kernel. In total, 7 product configurations (CPEs) are listed as vulnerable; see the affected-products list for the exact versions.
- How do I fix CVE-2024-46788?
- Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround.
- Does CVE-2024-46788 have an EU (EUVD) identifier?
- Yes. CVE-2024-46788 is tracked in the ENISA EU Vulnerability Database (EUVD) as EUVD-2024-42049.
- When was CVE-2024-46788 published?
- CVE-2024-46788 was published on 2024-09-18 and last updated on 2026-06-17.
References
- https://git.kernel.org/stable/c/177e1cc2f41235c145041eed03ef5bab18f32328
- https://git.kernel.org/stable/c/27282d2505b402f39371fd60d19d95c01a4b6776
- https://git.kernel.org/stable/c/7a5f01828edf152c144d27cf63de446fdf2dc222
Affected products (7)
- cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc1:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc2:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc3:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc4:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc5:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:6.11:rc6:*:*:*:*:*:*
More vulnerabilities in Linux Linux Kernel
- CVE-2023-2163 — Critical (CVSS 10.0): Incorrect verifier pruning in BPF in Linux Kernel >=5.4 leads to unsafe code paths being incorrectly marked as safe,…
- CVE-2015-8104 — Critical (CVSS 10.0): The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a…
- CVE-2015-1421 — Critical (CVSS 10.0): Use-after-free vulnerability in the sctp_assoc_update function in net/sctp/associola.c in the Linux kernel before…
- CVE-2014-2523 — Critical (CVSS 10.0): net/netfilter/nf_conntrack_proto_dccp.c in the Linux kernel through 3.13.6 uses a DCCP header pointer incorrectly,…
- CVE-2010-2495 — Critical (CVSS 10.0): The pppol2tp_xmit function in drivers/net/pppol2tp.c in the L2TP implementation in the Linux kernel before 2.6.34 does…
- CVE-2010-2521 — Critical (CVSS 10.0): Multiple buffer overflows in fs/nfsd/nfs4xdr.c in the XDR implementation in the NFS server in the Linux kernel before…
All CVEs affecting Linux Linux Kernel →
Other CWE-476 (NULL Pointer Dereference) vulnerabilities
- CVE-2022-36648 — Critical (CVSS 10.0): The hardware emulation in the of_dpa_cmd_add_l2_flood of rocker device model in QEMU, as used in 7.0.0 and earlier,…
- CVE-2020-14500 — Critical (CVSS 10.0): Secomea GateManager all versions prior to 9.2c, An attacker can send a negative value and overwrite arbitrary data.
- CVE-2010-2495 — Critical (CVSS 10.0): The pppol2tp_xmit function in drivers/net/pppol2tp.c in the L2TP implementation in the Linux kernel before 2.6.34 does…
- CVE-2026-46195 — Critical (CVSS 9.8): In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building…
- CVE-2026-31657 — Critical (CVSS 9.8): In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by…
- CVE-2026-31436 — Critical (CVSS 9.8): In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor…
Browse all CWE-476 (NULL Pointer Dereference) vulnerabilities →