CVE-2026-18413
CVE-2026-18413 is a high-severity vulnerability in Zephyrproject Zephyr with a CVSS 3.x base score of 7.8. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low. The underlying weakness is classified as CWE-787.
Key facts
- Severity: High (CVSS 3.x base score 7.8)
- EPSS exploit prediction: 0% (2nd percentile)
- Actively exploited: Not listed in CISA KEV
- Weakness: CWE-787
- Affected product: Zephyrproject Zephyr
- Published:
- Last modified:
Description
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.
Frequently asked questions
- What is CVE-2026-18413?
- The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.
- How severe is CVE-2026-18413?
- CVE-2026-18413 has a CVSS 3.x base score of 7.8, rated high severity. It is exploitable over local access with low attack complexity, requires low privileges and no user interaction. Impact on confidentiality is high, integrity high, and availability high.
- Is CVE-2026-18413 being actively exploited?
- It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (2nd percentile), an estimate of the probability of exploitation in the next 30 days.
- What products are affected by CVE-2026-18413?
- CVE-2026-18413 affects Zephyrproject Zephyr. See the affected-products list for the exact vulnerable versions.
- How do I fix CVE-2026-18413?
- Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround. Given its high severity, prioritise patching exposed systems.
- When was CVE-2026-18413 published?
- CVE-2026-18413 was published on 2026-09-28 and last updated on 2026-11-04.
References
- https://github.com/zephyrproject-rtos/zephyr/commit/3bda971a52ddbbec28f6fcfe3b006d34e8b9e5a9
- https://github.com/zephyrproject-rtos/zephyr/commit/9338c518bf2b6a396f166d4dbe9985ce7e44379c
- https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7jqq-2g5q-hcrp
Affected products (1)
- cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*
More vulnerabilities in Zephyrproject Zephyr
- CVE-2026-5067 — Critical (CVSS 9.8): A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by…
- CVE-2022-3806 — Critical (CVSS 9.8): Inconsistent handling of error cases in bluetooth hci may lead to a double free condition of a network buffer.
- CVE-2017-14199 — Critical (CVSS 9.8): A buffer overflow has been found in the Zephyr Project's getaddrinfo() implementation in 1.9.0 and 1.10.0.
- CVE-2018-1000800 — Critical (CVSS 9.8): zephyr-rtos version 1.12.0 contains a NULL base pointer reference vulnerability in sys_ring_buf_put(),…
- CVE-2021-3329 — Critical (CVSS 9.6): Lack of proper validation in HCI Host stack initialization can cause a crash of the bluetooth stack
- CVE-2023-0397 — Critical (CVSS 9.6): A malicious / defect bluetooth controller can cause a Denial of Service due to unchecked input in…
All CVEs affecting Zephyrproject Zephyr →
Other CWE-787 (Out-of-bounds Write) vulnerabilities
- CVE-2026-42369 — Critical (CVSS 10.0): GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other…
- CVE-2026-4746 — Critical (CVSS 10.0): Out-of-bounds Write vulnerability in timeplus-io proton (base/poco/Foundation/src modules). This vulnerability is…
- CVE-2025-43300 — Critical (CVSS 10.0): An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS…
- CVE-2025-24201 — Critical (CVSS 10.0): An out-of-bounds write issue was addressed with improved checks to prevent unauthorized actions. This issue is fixed in…
- CVE-2024-42479 — Critical (CVSS 10.0): llama.cpp provides LLM inference in C/C++. The unsafe `data` pointer member in the `rpc_tensor` structure can cause…
- CVE-2024-39791 — Critical (CVSS 10.0): Stack-based buffer overflow vulnerabilities affecting Vonets industrial wifi bridge relays and wifi bridge…