CVE-2026-31769
CVE-2026-31769 is a high-severity vulnerability in Linux Linux Kernel with a CVSS 3.x base score of 7.8. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low. The underlying weakness is classified as CWE-416.
Key facts
- Severity: High (CVSS 3.x base score 7.8)
- EPSS exploit prediction: 0% (3rd percentile)
- Actively exploited: Not listed in CISA KEV
- EU (EUVD) id: EUVD-2026-26582
- Weakness: CWE-416
- Affected product: Linux Linux Kernel
- Published:
- Last modified:
Description
In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput.
Frequently asked questions
- What is CVE-2026-31769?
- In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput.
- How severe is CVE-2026-31769?
- CVE-2026-31769 has a CVSS 3.x base score of 7.8, rated high severity. It is exploitable over local access with low attack complexity, requires low privileges and no user interaction. Impact on confidentiality is high, integrity high, and availability high.
- Is CVE-2026-31769 being actively exploited?
- It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (3rd percentile), an estimate of the probability of exploitation in the next 30 days.
- What products are affected by CVE-2026-31769?
- CVE-2026-31769 primarily affects Linux Linux Kernel. In total, 7 product configurations (CPEs) are listed as vulnerable; see the affected-products list for the exact versions.
- How do I fix CVE-2026-31769?
- Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround. Given its high severity, prioritise patching exposed systems.
- Does CVE-2026-31769 have an EU (EUVD) identifier?
- Yes. CVE-2026-31769 is tracked in the ENISA EU Vulnerability Database (EUVD) as EUVD-2026-26582.
- When was CVE-2026-31769 published?
- CVE-2026-31769 was published on 2026-05-01 and last updated on 2026-06-17.
References
- https://git.kernel.org/stable/c/28c75dd143ead62e0dfac564c79d251e21d5d74b
- https://git.kernel.org/stable/c/cae26eff1b56d78bed7873cf3e60a2b1bdd4da6c
- https://git.kernel.org/stable/c/d1857f8296dceb75d00ab857fc3c61bc00c7f5c6
Affected products (7)
- cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*
- cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*
More vulnerabilities in Linux Linux Kernel
- CVE-2023-2163 — Critical (CVSS 10.0): Incorrect verifier pruning in BPF in Linux Kernel >=5.4 leads to unsafe code paths being incorrectly marked as safe,…
- CVE-2015-8104 — Critical (CVSS 10.0): The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a…
- CVE-2015-1421 — Critical (CVSS 10.0): Use-after-free vulnerability in the sctp_assoc_update function in net/sctp/associola.c in the Linux kernel before…
- CVE-2014-2523 — Critical (CVSS 10.0): net/netfilter/nf_conntrack_proto_dccp.c in the Linux kernel through 3.13.6 uses a DCCP header pointer incorrectly,…
- CVE-2010-2495 — Critical (CVSS 10.0): The pppol2tp_xmit function in drivers/net/pppol2tp.c in the L2TP implementation in the Linux kernel before 2.6.34 does…
- CVE-2010-2521 — Critical (CVSS 10.0): Multiple buffer overflows in fs/nfsd/nfs4xdr.c in the XDR implementation in the NFS server in the Linux kernel before…
All CVEs affecting Linux Linux Kernel →
Other CWE-416 (Use After Free) vulnerabilities
- CVE-2026-13782 — Critical (CVSS 10.0): Use after free in Browser in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the…
- CVE-2026-4725 — Critical (CVSS 10.0): Sandbox escape due to use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149…
- CVE-2026-4688 — Critical (CVSS 10.0): Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox…
- CVE-2025-24085 — Critical (CVSS 10.0): A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.3 and iPadOS 18.3,…
- CVE-2024-43102 — Critical (CVSS 10.0): Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of…
- CVE-2021-32495 — Critical (CVSS 10.0): Radare2 has a use-after-free vulnerability in pyc parser's get_none_object function. Attacker can read freed memory…