CVE-2026-43466

CVE-2026-43466 is a high-severity vulnerability in Linux Linux Kernel with a CVSS 3.x base score of 8.2. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low.

Key facts

Description

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

Frequently asked questions

What is CVE-2026-43466?
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40
How severe is CVE-2026-43466?
CVE-2026-43466 has a CVSS 3.x base score of 8.2, rated high severity. It is exploitable over network with low attack complexity, requires no privileges and no user interaction. Impact on confidentiality is none, integrity low, and availability high.
Is CVE-2026-43466 being actively exploited?
It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 0% (25th percentile), an estimate of the probability of exploitation in the next 30 days.
What products are affected by CVE-2026-43466?
CVE-2026-43466 primarily affects Linux Linux Kernel. In total, 4 product configurations (CPEs) are listed as vulnerable; see the affected-products list for the exact versions.
How do I fix CVE-2026-43466?
Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround. Given its high severity, prioritise patching exposed systems.
Does CVE-2026-43466 have an EU (EUVD) identifier?
Yes. CVE-2026-43466 is tracked in the ENISA EU Vulnerability Database (EUVD) as EUVD-2026-28772.
When was CVE-2026-43466 published?
CVE-2026-43466 was published on 2026-05-08 and last updated on 2026-06-17.

References

Affected products (4)

More vulnerabilities in Linux Linux Kernel

All CVEs affecting Linux Linux Kernel →