CVE-2026-49099
CVE-2026-49099 is a medium-severity vulnerability in Apache Camel with a CVSS 3.x base score of 5.3. It is not currently listed as actively exploited by CISA, and its EPSS exploit-prediction score is low. The underlying weakness is classified as CWE-74.
Key facts
- Severity: Medium (CVSS 3.x base score 5.3)
- EPSS exploit prediction: 1% (45th percentile)
- Actively exploited: Not listed in CISA KEV
- Weakness: CWE-74
- Affected product: Apache Camel
- Published:
- Last modified:
Description
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component. The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
Frequently asked questions
- What is CVE-2026-49099?
- Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component. The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
- How severe is CVE-2026-49099?
- CVE-2026-49099 has a CVSS 3.x base score of 5.3, rated medium severity. It is exploitable over network with low attack complexity, requires no privileges and no user interaction. Impact on confidentiality is low, integrity none, and availability none.
- Is CVE-2026-49099 being actively exploited?
- It is not currently listed in CISA's KEV catalog. Its EPSS exploit-prediction score is 1% (45th percentile), an estimate of the probability of exploitation in the next 30 days.
- What products are affected by CVE-2026-49099?
- CVE-2026-49099 affects Apache Camel. See the affected-products list for the exact vulnerable versions.
- How do I fix CVE-2026-49099?
- Review the linked vendor and NVD advisories for patched versions and mitigations, then upgrade or apply the recommended workaround.
- When was CVE-2026-49099 published?
- CVE-2026-49099 was published on 2026-07-06 and last updated on 2026-07-08.
References
- https://camel.apache.org/security/CVE-2026-49099.html
- http://www.openwall.com/lists/oss-security/2026/07/05/24
Affected products (1)
- cpe:2.3:a:apache:camel:*:*:*:*:*:*:*:*
More vulnerabilities in Apache Camel
- CVE-2026-33453 — Critical (CVSS 10.0): Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap…
- CVE-2026-40453 — Critical (CVSS 9.9): The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such…
- CVE-2026-78162 — Critical (CVSS 9.8): Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before…
- CVE-2026-80352 — Critical (CVSS 9.8): Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Camel K. A YAML injection…
- CVE-2026-80351 — Critical (CVSS 9.8): Improper neutralization of directives in dynamically evaluated code ('eval injection') vulnerability in Apache Camel…
- CVE-2026-78329 — Critical (CVSS 9.8): Improper input validation vulnerability in Apache Camel Undertow component. This issue affects Apache Camel: from…
All CVEs affecting Apache Camel →
Other CWE-74 (Improper Neutralization of Special Elements (Injection)) vulnerabilities
- CVE-2026-122051 — Critical (CVSS 10.0): A flaw has been found in Edimax BR-6208AC 1.32. Affected by this vulnerability is an unknown functionality of the file…
- CVE-2026-120198 — Critical (CVSS 10.0): A vulnerability has been found in WAVLINK WL-WN530BE1-A V251117. Affected is the function con_check_read_finish of the…
- CVE-2026-114575 — Critical (CVSS 10.0): A flaw has been found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected by this issue is the function…
- CVE-2026-108918 — Critical (CVSS 10.0): A vulnerability was identified in Edimax BR-6208AC 1.32. Impacted is an unknown function of the file…
- CVE-2026-108917 — Critical (CVSS 10.0): A vulnerability was determined in Edimax BR-6208AC 1.32. This issue affects some unknown processing of the file…
- CVE-2026-105135 — Critical (CVSS 10.0): A vulnerability has been found in InternLM MindSearch 0.1.0. This issue affects the function ExecutionAction.run of the…
Browse all CWE-74 (Improper Neutralization of Special Elements (Injection)) vulnerabilities →